PulseGuard
PulseGuard Ltd. and Inc.
PulseGuard Ltd. offers pulsation dampers | Please phone 44(0) 161-480-9625
We have people not voicemail | Call toll free UK 08080-567-7423
Fluid Flow Control Animations
Fluid Flow Control Animations

FOOD, DRUG, BEVERAGE, BIO-CHEM., & HPLC
Companies we are proud to have served

Suction systems thumbnail

"qwick klamp" thumbnail

smooth and clean thumbnail

5 minute quick change thumbnail

bullet Printout PDF files of these pages 1, 2, 3, 4

To enable for you to receive exactly what you need, please read our definition of SMOOTHNESS & CLEANESS:

HOW SMOOTH IS SMOOTH?

SURFACE PREPARATIONS - options that affect cost and speed of availability

180 GRIT/BEAD BLAST = 85 micro inch c.l.a. + PASTE HONED = improved to 32 micro-inch
+ ELECTRO POLISH = 20 micro-inch c.l.a. + SMOOTH = 500 grit 16 micro-inch c.l.a. + POLISHED = 8 micro-inch c.l.a. + CREVICE FREE of any indentation greater than 0.0005" deep & less than 0.00075 wide + SUPER PURE = from 316L special low sulfur material, subject to all prior treatments plus passivation + ULTRA PURE = all above plus - from vacuum re-melt sulphur removal with 0.005% max hydrogen flash gold plated acetate wafer finger print electron beam surface test, 30-40 Angstrome chrome oxide layer, 2:1 chrome to iron, "outgassed" & 18 megohm test of demonized water flushant, dried with 99.999% pure hot N2, etc.

HOW CLEAN IS CLEAN?

IN PLACE CLEANABILITY - Your procedures that can determine product type.

FLUSH In PLACE "FIP", CLEAN In PLACE "CIP", STERILIZATION In PLACE "SIP", HYGIENIC IN PLACE "HIP". Please choose the most appropriate, from what you wish to achieve. Please state for all - flushants, biocides, sterilizing agents, & post sterilizing washes: Their generic names, and the pressure, temperature, flow velocity, & duration. Please provide a copy of the test procedure, for checking the effectiveness of the above process.

SOME OF THE MOST POPULAR CLEAN DAMPERS,
FOR YOUR CHOICE.

These options impact both cost and lead time availability. If you require definiton please call 1-888-DAMPERS

The PipeHugger BLTD
With F&D Nitrile/"Buna" F&D EP/"Nordel",
Fluoro/V.
Four minutes down time, to release and replace
the PIPEHUGGER damper capsule from the
tubing system.
Your process liquid flows through he bladder,
which is constantly flexing, shaking its surfaces
free of any settlings or sediment. Use -apple, citrus juice, & wine.

SIZES:- 0.15 Liter / 10 in3 to 2500 in3 / 40 Liter
Connections:- Upto 7, 1/2" / 12mm tubing,
through 10" / 250mm

FLUSHABLE (LEAST CLEAN)
BLTD flushable (least clean) damper


Low Pressure Flexorber

When your liquid has high clinging power you may specify virgin PTFE, and flow through constant agitation, FLEXORBER.
From Cocoa butter, bio-eng. to special RO.

SIZES:- 25 ml.-16 Liter, 1.5 in3 to 1,000 in3
Connections:- TriClover/ CB, or IDF etc. 3 max., upto 4" tubing (100mm)


MORE FLUSHABLE (LESS CLEAN)

LP flexorber more flushable (less clean) damper


The TubeGuard

Printable Dimensional Drawing
When your hot Lye, dilute Nitric, and flush cycles are below process pressure, the diaphragm must not be driven down by
the cushion pre-fill set pressure.
Transfer fluid volume is set, so diaphragm can not mask, the surfaces to be cleaned.

SIZES:- 0.25 Liter 15 in3 to 1,000 in3, 16 Liter
Flexflon, PTFE, or EIDP Teflon and Elastomer versions available.
Note: These are not "on the shelf" Inventory items.


CLEANABLE

Tubeguard cleanable damper
Printable Dimensional Drawing


The HPLCguard

C.I.P. - Widely spaced inlet and outlet plus small entrained volume + smooth virgin PTFE ensure full scouring at high velocity.
Use, High Pressure Liquid Chromatography

SIZES: 0.13 to 2.5 Liter, 8 to 150 in3



CLEANABLE IN PLACE

HPLC cleanable in place


The HPLC

Can be F.I.P., C.I.P., H.I.P., or S.I.P. (see above for abbr. explanation) at below process pressure depending on :- VELOCITY DURATION And FLUSHANT.

MOST CLEAN
HPLC most clean damper
 

To top of page

Suction Systems
PumpGuard
Typical for Suction Systems With PermaCushion foam fill.

pumpguard with permacushion foam fill
 
"Qwik Klamp" up to 12" only, and very low pressure
"qwik klamps" low pressure and up to 12"
Qwik Klamp types:
CB, Cherry Burrell SP, SanPro Kynar
SPI, Valex, Stainless Producs Inc CA. TC, Tri-Clover
CONNECTIONS "O" ring and screwed nut types

DIN, 11850/1 Unions

DSU, Danish Std.

IDF, ISO 2583, BS 4825

ILC, inLine Cleaning

RJT, Recess Joint BS 1846

SSR, Sepra Systems / FMC Calif Hose & Fittings Co.

To top of page

5 MINUTE DOWN TIME *MOUNTING BLOCK / Piping Base Products

WARNING Pulse Dampers may be engergy sotring, Proceed with EXTREME CARE
* THE PIPEHUGGER Bolted configuration
The bolted damper capsule body also speeds & simplifies dissassemble compared to the tamperproof segmental lock ring standard.
parts identification of pipehugger bolted configuration

parts identification of pipehugger bolted configuration

parts identification of pipehugger bolted configuration
schematic of D detailed explaination

1 - Release the DAMPER CAPSULE A from the MOUNTING BLOCK B piping base by removing bolts C (NB. Not stressed for pipe loadings) NEVER RESTRAIN THE DAMPER CAPSULE

2 - Open Cushion Pre-Fill Valve9019c, pt. D (see schematic) by removing the yellow sealing cap, and turning the 3/4" AF swivel nut. When all pre-fill pressure is realsed, unscrew the valve body and set carefully aside.

3 - Without scratching the sealing for Valve D stand capsule on dome end E. Remove all of 4, 8, or 12 bolts F

4 - Using Jacking bolts G lift base plate H out of dome E.

5 - Place base plate on a smooth clean surface so as not to damage sealing surface M. Remove bladder J and "O" seal, K, place them in a plastic bag, seal the bag, & return it to factory immediately.

In fact, the next few months in the rolex replica Korean Peninsula sea infested, and never only replica watches "Carl Vincent" aircraft carrier. The amphibious assault ship of the replica watches uk "American" is also on its way to Korea.

To top of page
Return to Main Index Page
to the main industry page

Return to the beginning of PulseGuard, pulsation dampeners


Selecting Pulsation Dampeners for Different Pump Systems.
Flow through pulsation dampers are at least 3 times more efficient than T off line accumulators.
Dampeners that do, flow goes through, but pressure pulsation does not.
PulseGuard Pulsation DampersThe Smooth Flow People

Call Toll Free 1-888-DAMPERS (326-7377) / See also: Pulsation-Dampeners.com for a pulsation dampener.


Fluid Flow Control Fluid-Flow-Control.com The Fluid Flow Control Source Pumps Accumulators Filters Dampers Heat Exchangers Valves Mixers P.I. / Pressure Indicators Controls Meters Vessels