PulseGuard flow through pressure pulsation dampers

PulseGuard Ltd. offers pulsation dampers | Please phone 44(0) 161-480-9625
We have people not voicemail | Call toll free UK 08080-567-7423

On Various Types of PUMPS -
The PIPEGUARD HP range by PULSEGUARD
The original From the originators
Since 1965, the PipeGuard range has served both on and offshore industry.
Capacity 1 in3 - 60 Gallon, 750psi through 30 Kpsi, with all stainless shells.

PDF of this page

To PipeGuard HP

To All Pumps

Index Page of All PiG-HP Options - prices/dimensions, application story, dimensional drawing...

Whatever your pipe system type,
PULSATION PREVENTION
Pumps discharge liquid without having to instantly accelerate all the liquid in the pipe.

Production platform methanol injection at up to 15,000 psi / 1000 Bar is a shock wave interception application.
At pressure, diaphragm head pumps, have low volumetric efficiency. This results in a discharge spike, instead of a progressive acceleration.
The shock wave travels at over 3,000 mph (1400 M/s), and must go through the damper to be intercepted.

Sheer sensitive polymer, is transferred 500 meters under perfect control.
MASS FLOW CONTROL by VS Drive, works perfectly when all spikes and fluctuations are removed.

Corrosion inhibitor injection, with variable speed drive, has wide range of frequencies
All frequencies are intercepted by thru-flow PIPEGUARD

1972 Semi-sub. North Sea exploration, increasing the weather window with the CRESTPICKER heave motion compensator from LIQUID DYNAMICS INTERNATIONAL Ltd.

Light sweet crude and Hydrocarbon condensate pumped 30 miles, 48 Km

NO ACCELERATION HEAD or pipe resonant vibration

For larger diameter dampers, where the ratio of connection size to chamber diameter ensure the dissipation of intercepted higher frequency pressure pulsation, please see the PIPEHUGGER Low pressure & PIPEHUGGER High pressure ranges.

Back to top
To PipeGuard HP
To all Pumps

Selecting Pulsation Dampeners for Different Pump Systems.
Flow through pulsation dampers are at least 3 times more efficient than T off line accumulators.
Dampeners that do, flow goes through, but pressure pulsation does not.
The Smooth Flow People

Call Toll Free 1-888-DAMPERS (326-7377) / See also: Pulsation-Dampeners.com for a pulsation dampener.

Fluid Flow Control

Production platform methanol injection at up to 15,000 psi / 1000 Bar is a shock wave interception application. At pressure, diaphragm head pumps, have low volumetric efficiency. This results in a discharge spike, instead of a progressive acceleration. The shock wave travels at over 3,000 mph (1400 M/s), and must go through the damper to be intercepted.
Sheer sensitive polymer, is transferred 500 meters under perfect control. MASS FLOW CONTROL by VS Drive, works perfectly when all spikes and fluctuations are removed.		Corrosion inhibitor injection, with variable speed drive, has wide range of frequencies All frequencies are intercepted by thru-flow PIPEGUARD
1972 Semi-sub. North Sea exploration, increasing the weather window with the CRESTPICKER heave motion compensator from LIQUID DYNAMICS INTERNATIONAL Ltd.	Light sweet crude and Hydrocarbon condensate pumped 30 miles, 48 Km NO ACCELERATION HEAD or pipe resonant vibration
For larger diameter dampers, where the ratio of connection size to chamber diameter ensure the dissipation of intercepted higher frequency pressure pulsation, please see the PIPEHUGGER Low pressure & PIPEHUGGER High pressure ranges.