INJECTION TEST PUMPS
with Various PULSEGUARD Dampers
High Pressure PUMPS & INTENSIFIERS
Example in the range 6,000psi/400 Bar - to - 30,000psi/2,000Bar
with decompression shock interception dampers from off the shelf inventory
GO TO The Flexorber Range.
For liquids that are only compatible PTFEs
Example: Injecting AMINE corrosion inhibitors that will degrade DuPont Viton, Fluorel, & other elastomers.
10 in3/150ml 7000psi/480Bar Flexorber damper with PPI / Autoclave connections from stock. 30 in3/half liter 2,250psi/155 Bar, low pressure suction damper off the shelf ensures filling on the fast suction stroke. GO TO The PipeHugger Range.
For liquids compatible with elastomers
PulseGuard Is NOT a:
"We can get it for you"
"We can import it"
"we know where to find it" Company
We have it, we made it, its ready for you, like this 40 in3 5,250psi, A20 wetted parts damper.
Fluoro-elastomer bladder installed and 12 hour tested over night shipped next day.
This low pressure 90 in3 suction damper too, for 500 psi service was designed, completely made here, & is ready to ship. GO TOThe PipeGuard Range.
For externally corrosive environments and liquids compatible with elastomers
YOU NEED IT - WE'VE GOT IT
The 1965 Original from the originators, not an imported copy.
60 in3/One liter, 11,000 psi / 750 Bar 1 inch /24mm connections, shipped in 2 days, used on discharge. With a 120 in2/2 liter, 600psi/400Bar suction booster all 316L on "same day" availability, enable a 35% increase in a pump performance.
Installation to ensure bubble purging prevents vapor lock, pump know, loss of prime.
Injection Pumps Injection Pumps with Dampers - Technical