PulseGuard Ltd. offers pulsation dampers | Please phone 44(0) 161-480-9625
We have people not voicemail | Call toll free UK 08080-567-7423
Fluid driven reciprocating pumps often make their suction, or return stroke, faster than the power stroke. This is liable to case incomplete filling. The discharge, or power stroke will then begin with shocking pulsation. A suction damper will also enable you to pump much faster.
Mount Suction Dampers so that any small bubbles do not collect in them, cause the pump to loose prime.
Click on damper or pump for associated pages
GO TO Intensifier & HP PipeGuard PiG-HP, gas in the bag & liquid in shell, Application Story - installation pictures, problems & solutions, pump and damper links
GO TO Intensifier & LP PipeGuard PiG-LP, gas in the bag & liquid in shell, Application Story - installation pictures, problems & solutions, pump and damper links
HP PipeGuard PiG-HP - Available from solid billet, for medium, high, and ultra high pressures. Pipe thread, Hubs, and super pressure fittings all standard. 23 different gas bag materials in inventory. More than 33 years of marine and industrial expertise.
LP PipeGuard PiG-LP - Slim and long, enables reasonable cost for all stainless shell. Small diameter stiff gas bag suits flow fluctuation removal. Some pressure pulse damping capability from flow through configuration. Partially flushable. Over 1,000 in inventory.
HP PipeGuard PLAS - With a maximum design pressure of 225psi, 15 Bar at 60 F 15 C, 1/8" 3mm through 6" DN 150mm flanged. 1 in3 15ml. through 10 gallon 40 litre, PVC or PP. Over 1,000 in inventory.
Return to Installation Index