North Korea held a large-scale parade on the replica watches uk 15th to commemorate the "Sun Festival", the first time in the parade on the display of fake watchessubmarine-launched ballistic missiles. Han Mei media had speculated that North Korea will be in accordance with established practice.The United States, Japan,replica watches Korea parties are already preparing for a variety of actions.
PulseGuard Ltd. offers pulsation dampers | Please phone 44(0) 161-480-9625
We have people not voicemail | Call toll free UK 08080-567-7423
(Write this 1.5% down for your use in your size calculation).
Pressure spikes, like all forms of shock, are highly directional. This is because according to the compressibility of the liquid, the pressure transfer wave speed, that produces the "acoustic frequency", is typically in the order of 3,500 mph or 1400 meters per second. At these velocities a pressure wave may ricochet, but otherwise not change direction.
Pressure wave pulsation, may come back from the system to the meter at a frequency where it gives a boost to the speed of rotation at which the blades are spinning. Alternately there can be a reflection from the other side, which may stop or slow the spin. Additionally the blades can be fractured of the shaft bent.
The worst results are experienced in systems with oversized pipe.
Where pipes are sized, depending on liquid viscosity, for 0.6 to 1.5 meters per second flow velocity on the suction side of a pump, and for 3 to 5 meters per second on the discharge side of a pump, a small amount of pressure drop from flow friction, works wonders. The system becomes dissipative, so not an amplifier. The turbine meter turns fast - has a flywheel effect, and is consequently stable. The pipes cost a lot less because they are smaller, and if a pulsation damper is required at all, its cost will be greatly reduced.
UNDERSTANDING FLOW OR PRESSURE PULSATION
WAYS TO GO
Find Your Factor for your Pump System GO TO
Return to the top
Return to the Explanation index